What to do if the drill pipe is buried

1. Use a breaker to solve the problem

If the rotary drilling rod is buried very shallowly, you can use a breaker to knock it, break the soil layer, and make the rotary drilling rod float out of the ground. This method is relatively simple to operate and does not require much professional knowledge. However, this method is only suitable for shallow burials. If the depth is large, other methods need to be used.

2. Use an excavator for excavation

If the rotary drilling rod is buried deep, you need to use an excavator for excavation. This method requires professional excavator operators to slowly dig out the rotary drilling rod by digging layer by layer. It should be noted that during the excavation process, it is necessary to avoid damage to nearby buildings, roads, etc.

3. Use a lifting rod for disassembly

If the rotary drilling rod is buried in a pile or covered with a large amount of concrete, it is difficult to use tools such as excavators to dig. At this time, you can use a lifting rod for disassembly. First, you need to confirm the position of the rotary drilling rod, and then use the lifting rod for disassembly. This method has high technical requirements for operators, and it is necessary to ensure that the disassembly process will not cause any impact on the surrounding environment.

The above three methods can solve the problem of rotary drilling rod being buried. You need to choose the appropriate method according to the actual situation. In addition, before any operation, you must take safety measures to avoid any harm to yourself and the surrounding environment.

In short, the burial of rotary drilling rods is a common problem in engineering construction. Once it occurs, effective measures need to be taken in time to solve it. If you do not have relevant technical knowledge, you need to seek professional construction teams or technical support in time to avoid greater losses.